Rangemaster RI60 Guide de l'utilisateur télécharger pdf (Page 14)

INSTALLATION

Check the appliance is electrically safe when you have ﬁnished.

Note: Slide the optional sleeve onto the bracket if ﬁtting to

thin work surfaces.

Locate the bracket to the slot on the hob base and then

tighten the retaining screw until it is locked to the worktop.

Electrical Connections

This appliance must be installed by a qualiﬁed electrician

to comply with the relevant Institute of Electrical

Engineers (I.E.E.) regulations and also the local electricity

supply company requirements.



WARNING: THIS APPLIANCE MUST BE EARTHED

Note: All external wiring must comply with the IEE

Regulations for the Electrical Equipment of Buildings.

Connection to the electrical supply can be made with either

a plug and socket, or be permanently wired via a double pole

switch.

The electrical cable to be ﬁtted must be 250V high

temperature PVC (85°C), 6mm² minimum conductor size.

Connect the hob up as shown in Fig.5-5

and Fig.5-6.

IMPORTANT: The wires in the mains lead are coloured in

accordance with the following code:

Green and yellow: Earth

Blue: Neutral

Brown: Live

Hob Check

Check each cooking zone in turn.

Customer Care

Please complete your contact details in the front of this

section. Please inform the user how to operate the hob and

hand over the instruction pack.

Thank you.

ArtNo.130-0008 - Electrical connections Induction hob



 

 









Fig.5-5

ArtNo.314-0010 Induction electrical label

4 3 2 1

Fig.5-6

ArtNo.317-0012 - Hob fittings 1



























Fig.5-4

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Rangemaster RI60 Guide de l'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Rangemaster RI60