Rangemaster RGG60 Guide de l'utilisateur Page 7

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 20
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 6
5
Essential information
Allow the cooker to cool and then isolate the electricity
supply before carrying out any thorough cleaning.

Never use paint solvents, washing soda, caustic
cleaners, biological powders, bleach, chlorine based
bleach cleaners, coarse abrasives or salt. Do not
mix dierent cleaning products – they may react
together with hazardous results.
All parts of the hob can be cleaned with hot soapy water
– but take care that no surplus water seeps into the appliance.
Remember to switch on the electricity supply before re-using
the cooker.
Regular cleaning is recommended. For easier cleaning, wipe
away any spillages immediately.
Hotplate Burners
The burner heads and caps can be removed for cleaning
(Fig.3-1). Make sure they are absolutely dry before replacing
them.
The single ring burners
When retting the burner head, ensure that the notch and
opening lines up with the electrode in the base. Check that
the burner head is level and that the cap is tted centrally on
the burner head.
Cleaning Table
Refer to the cleaning tables (Table 3-1 and Table 3-2) for
details on cleaning the hob.
The cleaners listed are available from supermarkets or
electrical retailers. For enamelled surfaces use a cleaner
that is approved fro use on vitreous enamel.
3. Cleaning Your Hob
ArtNo.316-0007 Gas burner
A
B
D
C
F
E
Fig.3-1
ArtNo.050-0009 Cleaning table 1
Hotplate top
Pan supports
Burner caps
Burner heads
Stainless steel or
glass
Enamel coated
cast iron
Enamel
Aluminium
Hot soapy water and a soft cloth.
remove stubborn stains gently
with a nylon scourer.
Cif cream cleaner and a nylon
scourer; dishwasher.
Cif cream cleaner and a nylon
scourer; dishwasher.
Cif cream cleaner or similar with
a soft cloth. Take care not to be
too vigorous.
Part Finish
Recommended
cleaning method
ArtNo.050-0010 Cleaning table 2
Control panel
Control knobs
Stainless steel or
glass
Plastic and brushed
aluminium
Damp soft cloth. Do not use
abrasive cleaners on the
lettering.
Damp soft cloth.
Part Finish
Recommended
cleaning method
Table 3-1 Cleaning the hotplate
Table 3-2 Cleaning outside the hotplate
A – Cap, B – Head, C – Notch, D – Base, E – FSD , F – Electrode
DocNo.041-0001 - Cleaning - BI hob gas 4-element
Vue de la page 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Commentaires sur ces manuels

Pas de commentaire